ProGuard II™ Safety Needle Holder
|
|
Kendall's ProGuard II™ Safety Needle Holder is designed as a single use disposable product that provides total needle protection, front and back for those who draw blood specimens. After the specimen is obtained the operator closes the hinged door sealing the open end of the tube holder for back end protection. Then the operator then retracts the needle with the thumb, allowing single-handed activation, an important feature in any safety device. The entire unit is then discarded into a sharps container
|
BD Eclipse Safety Shielding Blood Collection Needle
|
The BD Eclipse shield is activated immediately after the needle is removed from the vein. When the thumb pushes forward on the shield, an audible click indicates that the safety shield is locked in place. The BD Eclipse shield has minimal impact on waste disposal. |
The BD Eclipse safety shielding blood collection needle is attached directly to a standard blood collection needle and already aligned with the bevel of the needle, so no extra assembly or adjustment is required by the use. The intuitive design of the advanced protection technology means there is no need to change the standard, one-handed venipuncture technique when using the BD Eclipse Safety Shielding Blood Collection needle. The procedure remains familiar and the user's other hand is free to apply pressure to the patient's puncture site. |
BD Vacutainer® Push Button Collection Set
|
The one-handed safety activation of the push button allows for activation of the safety mechanism while still attending to the patient/venipuncture site, and provides easier, safer blood collection for the healthcare worker, with no compromise to patient care. |
BD Vacutainer® Push Button Collection Set is the only blood collection system with push-button technology. It offers split-second protection for that single moment which could potentially change your life. The push-button safety mechanism instantly helps protect you against needlestick injury. Its in-vein activation reduces risk of healthcare worker exposure to a contaminated needle, provides easy activation without patient discomfort, and is ideal for use in high-risk environments. |
Venipuncture Needle-Pro Needle Protection device
|
|
The Venipuncture Needle-Pro device is a disposable holder-based needle protection device that, once engaged against any hard surface, covers both ends of a multisample blood draw needle, thus protecting clinicians against accidental needlesticks throughout the entire disposal process. The one-handed operation leaves the opposite hand free to perform hemostasis. Upon engagement of the safety feature, the holder and needle are disposed of together, complying with the updated OSHA directive concerning the prohibition of removing contaminated needles from blood collection holders and disposing of the holder together with the contaminated needle immediately after use. |
Saf-T Holder® Devices (Not available in Canada)
|
Product Features
|
Saf-T Holder® devices come with the back-end needle and multi-sample Luer permanently attached to the holder to eliminate potential exposures and holder re-use. Available with Saf-T Wing® Blood Collection Sets, Saf-T Holder® devices also provide easy needless transfer after a syringe draw.
|
Hypodermic Needle-Pro® EDGE™ Safety Device (Only available in USA)
|
|
Smiths Medical has long been a leader in the innovation of needle safety devices that meet clinical expectations and provides a cost-effective, safety-engineered solution to needle safety requirements. Today's hospital and federal directives demand accuracy, efficiency, cost saving measures, as well as patient and healthcare worker safety, all within an increasingly fast-paced clinical environment. Smiths Medical has responded to these needs by advancing its Hypodermic Needle-Pro® needle safety device to incorporate features that give the clinician an important edge when it comes to safety, convenience, and cost-efficiency. |
Carpuject® Needle-Pro® Device (Only available in USA)
|
Product Features Meets NIOSH/CDC recommendations for safety devices
|
The Carpuject® Needle-Pro® device has been designed specifically for Carpuject® prefilled medication cartridges. The Needle-Pro® device easily slides onto the medication cartridge so that once the clinician has completed the injection, the needle can be immediately secured by engaging the protective sheath over the contaminated needle.
|
VanishPoint® Blood Collection Tube Holder
|
|
|
VACUETTE® QuickShield Tube Holder
|
|
VACUETTE® QUICKSHIELD Safety Tube Holder For daily blood collection routine
The VACUETTE® QUICKSHIELD Safety Tube Holder is also available pre-assembled with a VACUETTE® VISIO PLUS Needle, which makes it the ideal product for safe blood collection. The VACUETTE® VISIO PLUS Needle with optical venipuncture control is a great help for blood collection staff. When venipuncture is successful, blood flow is visible in the view window – the transparent plastic hub of the needle. |
S-Monovette® Blood Collection System
|
Aspiration method: The S-Monovette® and needle are assembled immediately prior to collection. After venipuncture, the plunger is withdrawn slowly until the tube is filled. Vacuum method: A vacuum is formed immediately prior to collection by locking the piston into the base of the S-Monovette® and breaking off the plunger. After the vein is punctured, the evacuated S-Monovette® is connected to the needle.
Sarstedt, Inc. |
The S-Monovette® is an enclosed multiple-sampling blood collection system that utilizes either an aspiration or vacuum method of collection. The aspiration method of collection virtually eliminates syringe draws and provides a closed connection for line draws. The system includes tubes in a full range of volumes and additives, multi-sampling needles with pre-assembled holders, needle protection devices, and safety winged blood collection sets.
Safety Features and Benefits: Using the S-Monovette® aspiration method of collection minimizes needlestick injuries by eliminating the practice of drawing blood from a vein or in-line system into a syringe and back sticking into a blood tube. The all-plastic screw cap tubes minimize breakage and the aerosol effect. The multi-sampling needles with pre-assembled holders are not reusable and prevent any risk of needlestick injury that may occur by unscrewing a contaminated needle from the holder. |
Haemo-Diff Blood Smear
|
Mechanics of the Device: Place the Haemo-Diff vertically onto the S-Monovette®, piercing the cap membrane. Place the Haemo-Diff in a sloping position onto the slide to dispense a droplet of blood. Use the Haemo-Diff’s smear edge to create a smear.
Sarstedt, Inc. |
Sarstedt’s Haemo-Diff Blood Smear is designed specifically to work with the S-Monovette® Blood Collection System. The unique device creates a blood droplet directly from the closed S-Monovette® tube and smears this droplet onto the slide. This double function minimizes exposure to bloodborne pathogens and eliminates the need for additional products.
Safety Features and Benefits: The Sarstedt Haemo-Diff minimizes exposure to bloodborne pathogens because opening of the tube is no longer required during slide preparation. The dual-function device also saves time and material costs. |
Microvette® Capillary Blood Collection System
|
Mechanics of the Device: 100 and 200µl: Holding the device horizontally, collect blood until the assembled capillary is filled. Rotate the tube upright to allow the blood to flow into the Microvette® tube. Turn the cap to remove and discard the pre-assembled capillary as one unit. Remove the preassembled recap from the base and seal the Microvette®. 300 and 500µl: Remove the twist cap and attach it to the base of the Microvette®. Collect blood using any part of the collection rim. Remove the cap from the base and seal the Microvette®.
Sarstedt, Inc. |
Sarstedt’s Microvette® Capillary Blood Collection System is a safe and reliable system for the collection of 100 to 500µl. Microvette® 100 and 200, for 100 and 200µl volumes respectively, are designed with pre-assembled capillaries for optimal volume control but can also be used without a capillary. Microvette® 300 and 500, for 300 and 500µl volumes respectively, are designed with special rims for the gravity flow principle of collection. Both versions have twist caps to minimize aerosols and are available in a full range of additives. The special conical design of the inner tube of the Microvetteâ 100 to 300 ensures optimal serum/plasma recovery after centrifugation.
Safety Features and Benefits: Sarstedt’s Microvette® Capillary Blood Collection system features an easy-to-use twist cap to reduce exposure to bloodborne pathogens via aerosols. Smooth tube interiors prevent sample hold-up, allowing optimal sample mixing and recovery. Each Microvette® is marked with the expiration date and lot number. |
Safety Needle
|
Sarstedt, Inc. |
Sarstedt’s Safety-Needle is designed specifically to work with the S-Monovette® Blood Collection System. The Safety-Needle features a 3-pin locking mechanism and an integral holder, which eliminates the risk of infection associated with disassembling the needle and holder or re-using contaminated holders.
Safety Features and Benefits: The Safety-Needle aids in preventing needlestick injuries by enclosing the needle immediately after use. Its compact design is engineered to prevent unintentional contact with the contaminated back end of the needle.
Mechanics of the Device: Perform venipuncture (bevel of the needle upside, yellow safety device right hand side) and carry out blood collection according to the user guidelines on the S-Monovette® packaging and institutional policy. Remove the final S-Monovette® from the Safety-Needle and withdraw needle from vein. Place the safety device on a stable, flat surface and press the needle gently down until it locks into the safety device with an audible “Click”.
|
|
Mechanics of the Device: Grasp the Safety-Multifly® by the wings while performing venipuncture. When blood collection with the S-Monovette® system is complete, remove the needle from the vein by holding the needle protector at its rear end with your thumb on top and your forefinger below while simultaneously pushing it forward until the needle is completely enclosed.
Sarstedt, Inc. |
Sarstedt’s Safety-Multifly® needle is designed specifically to work with the S-Monovette® Blood Collection System. The winged blood collection set has a translucent needle protector for one-handed activation immediately after use, aiding in eliminating the risk of needlestick injuries and allowing clear visibility of blood flow.
Safety Features and Benefits: The Safety-Multifly® aids in preventing needlestick injuries by enclosing the needle immediately after use. Its compact design ensures minimal disposal volume, and it is available in a range of gauges and tubing lengths. |
|
A safe, simple and easy-to-use solution for obtaining blood samples from patient’s fingers. The innovative SurgiLance® safety lancet is one of the world’s most popular needlestick solutions.
SurgiLance® gives POC providers a quick and effective testing method, minimizing pain while maximizing patient protection. Features: Safe
Simple
Efficient
Applications The SurgiLance® safety lancet is used for a variety of testing applications, including:
Try It Today for Free Request a free product sample of SurgiLance® safety lancets today and experience the difference
For More Information Mark Stoppenbach | MediPurpose®
|
Helpful Web Pages
- Sharps Injury Prevention Resources
- Sharps Safety Products Categories
- ISIPS Safety Feature Evaluation Forms
- Exposure Control Plan
- Educational Games and Video Training
- The Compendium of Infection Control Technologies
- Where to find Safety Products? Click here for the most comprehensive list of safety products found anywhere!